Yu Cha Company
 
 
English
 
 
 
Submenu
Friendly Links
Line

QR CORD

Counter
Today:790
Total:2203886

Product

NS-750 AUTOMATIC SHIFTING AND BLOWING DUST COLLECTOR
NO: NS-750R
Description: Suitable for any powder, such as graphite, fiber, food, ,carbon powder, aluminum powder, pesticide, medicines. Allows for filtrating up to 0.1 µm.

** YU CHA nano-membrane filter has           passed the ASHRAE test. The                     filtration efficiency reaches MERV 16

NS-750  AUTOMATIC SHIFTING AND                     BLOWING DUST COLLECTOR

 

 No manual cleaning of filter element is required.
 Great air flow. High static pressure.
 Turbo type air blower is excellent for 24 hours  running without generation of high temperature.
 A dust collector designed Taiwan with innovative  automatic Scraping and blowing the filter element . It also features noiseless running  without need of changing filtrating bag.
 Applicable for various poisonous and non-  poisonous powder dusts, such as graphite, fiber,  food, carbon powder, aluminum powder,  pesticide and medicine, etc.
 The filter element is manufactured of PET  material with filtrating capacity up to 0.1µm  (micron) of powder. Great filtrating area to  prevent working environment from pollution.  Suitable for dry and wet filtration and easy  replacement.
When the dust collector stops, dust removing device starts for automatically removing dusts on the filter element. The dust removing method is employing automatic rotation principle to remove dusts on the filter element. Then using air pressure to blow off the tiny powder on the filter element surfaces. This effectively, prevents the filter element from jamming while extending the service life of the filter element.
Equipped with noise eliminating box to reduce noise.
Equipped with pressure gauge for checking jamming condition with ease.
The dust collector automatically creates an internal sieving air flow, that permits graphite powder or fiber directly drop into the dust collection tank according to centrifugal force principle. This prevents foreign objects from bumping against the filter element while extending its service life.
The oversized filter element is manufactured from corrugated PET material to increase filtration area, which is suitable for tiny powder.
The dust collect tank can be easily removed for cleaning by unbuckling the pull tab. (the tank is fitted with roller, easy to move).
Motor horsepower over 7.5HP is available.
Small space occupation.

A variable to equip with manual dust collector.

The dust bucket can be designed as a garbage bag for collection.

(If necessary, the appearance can be additionally designed into 304 material​)

 

 

 

 

P-9

 Pipe ( There are various materials and diameters )
 

 

  P-6
Flat mouth and round brush
 
 

P-5
Wide mouth

( Plastic or stainless steel )

 
  P-3
P-3 Double fork tube ( sus 304 or ss 400 Paint )
 
 

P-1

Stainless steel Dust hood

 
 

P-4

Adapter ( sus 304 or ss 400 Paint )

 

NS-750  AUTOMATIC SHIFTING AND BLOWING DUST COLLECTOR

 

NS-750  AUTOMATIC SHIFTING AND BLOWING DUST COLLECTOR

 

 

Check if your power voltage complies with that of the dust collector or not. In case of over-current or lack of phase running, the magnetic switch will automatically shut off power to protect motor.

Connect air hose of air compressor to the dust blowing device. A quick connector should be used.

Once power wires have been connected, check to see if the air blower (motor) running direction is correct or not.

Do not place any object at the air outlet port. This may prevent it from dropping into the blower, causing damage to the blower.

Do not place your hands into the air inlet and outlet ports to avoid danger.

When cleaning the dust collection tank, be sure to stop the dust collector, then pull up the buckles and pull out the tank for cleaning. Perform proper cleaning according to dust amount.

When fitting the dust collection tank, align it's position correctly, then fasten all buckles.

When pressure reaches 450mmAq, turn off motor, then pressing the dust removing start switch for about 3-5 minutes.

In case the air pressure at air inlet port decreases to 500mmAq, stop the dust collector for replacing the filter element.

When the dust collector stops, starting dust removing device for automatically removing dusts existed on the filter element. To clean the filter element, first using automatic rotation principle to remove dusts, then using air pressure to blow off the tiny powder on the filter element. This will prevent the filter element from jamming while extending it's service life.

The interior of dust collector automatically creates a sieving air flow effect, which will enable graphite powder or fiber etc. to drop into the dust collection tank due to centrifugal force. This prevents the filter element from bumping by any object, and extends the service life of filter element.