CS-103 WATER-LEACHABLE DUST COLLECTOR (For Dry and Wet Applications)

NO：	CS-1031. CS-1032. CS-1033
Specifications：	Explosion-proof vacuum cleaner
Description：	Suitable for any powder with a burning point or high temperature, such as graphite, fiber, aluminum powder and magnesium powder.

Share:

** YU CHA nano-membrane filter has passed the ASHRAE test. The filtration efficiency reaches MERV 16

CS-1031 TURBO TYPE WATER FILTERING DUST COLLECTOR

CS-1032 MULTI-STAGE WATER FILTERING DUST COLLECTOR

CS-1033 HIGH-PRESSURE WATER FILTERING DUST COLLECTOR

•	The dust collector is capable of reducing temperature for powder or granule with some burning point magnesium alloy， Aluminum alloy or high temperature, such as powder dusts exhausted from polishing machines or grinders.
•	Employ cyclonic centrifugal principle to suck powder or granule into bottom drum.Explosion-proof vacuum cleaner.
•	The blower is applied for sucking air only. The sucked dusts do not directly contact with motor for increased service life of motor.
•	For dry and wet applications.
•	Quiet operation. No burning point problem. No need to change filtering bag.
•	Suitable for poisonous or non-poisonous dusts such as graphite, fiber, food, carbon powder, aluminum powder, pesticide and medicine. Also featuring anti- explosion of powder.
•	Iron chips or copper chips can also be collected (no front tank is required) with maximum durability and easy cleaning..
•	Various motor horsepowers and specifications to meet specific requirements.
•	The filter-core is manufactured from PET below type filtering element, providing greater filtering area. Applicable for any fine powder.

•	Manufactured from SUS#304 material features extremely smooth construction, no powder adhering and easy cleaning.

•	The filter-core allows for filtering powder of up to 01µm(micron).

•	The turbo blower is ideal for 24 hours running without high-temperature growth.

•	Equipped with sound buffering device for reducing noise.

•	Equipped with pressure gauge for clearly checking if any jamming occurs or not.

		P-9 Pipe ( There are various materials and diameters )

		P-6 Flat mouth and round brush

		P-5 Wide mouth ( Plastic or stainless steel )

		P-3 P-3 Double fork tube ( sus 304 or ss 400 Paint )

		P-1 Stainless steel Dust hood

		P-4 Adapter ( sus 304 or ss 400 Paint )

• The machine is copyrighted by YU- CHA Company.

YU-CHA Company reserves the right to change the design.

CS-1031 TURBO TYPE WATER FILTERING DUST COLLECTOR

CS-1032 MULTI-STAGE WTER FILTERING DUST COLLECTOR

CS-1033 HIGH-PRESSURE WATER FILTERING DUST COLLECTOR

CS-1031 TURBO TYPE WATER FILTERING DUST COLLECTOR

•	The powder or granules with a burning point or high temperature are sucked through the air inlet port, which will touch the cyclonic hood. With the centrifugal force, the powder or granules will be rotated to the lower tank for mixing with water that reduces temperature. The upper tank is equipped with filter-core that may prevent fine powder from splashing. A sound buffering device, mounted at the back side, may reduce noise level.
•	When cleaning the dust collection tank, press the pulling rod, turn, pull up and turn it to the concave position. Then you can pull out the lower tank for turning it down.
•	Do not place any object at the air outlet port, because it may drop into the sound buffering pipe, resulting in a damage on the blower.

CS-1032 MULTI-STAGE WATER FILTERING DUST COLLECTOR

•	The powder or granules with a burning point or high temperature are sucked through the air inlet port, which will touch the cyclonic hood. With the centrifugal force, the powder or granules will be rotated to the lower tank for mixing with water that reduces temperature. The upper tank is equipped with filter-core that may prevent fine powder from splashing. A sound buffering device, mounted at the back side, may reduce noise level.
•	When cleaning the dust collection tank, press the pulling rod, turn, pull up and turn it to the concave position. Then you can pull out the lower tank for turning it down.
•	Do not place any object at the air outlet port, because it may drop into the sound buffering pipe, resulting in a damage on the blower.

CS-1033 HIGH-PRESSURE WATER FILTERING DUST COLLECTOR

•	The powder or granules with a burning point or high temperature are sucked through the air inlet port, which will touch the cyclonic hood. With the centrifugal force, the powder or granules will be rotated to the lower tank for mixing with water that reduces temperature. The upper tank is equipped with filter-core that may prevent fine powder from splashing. A sound buffering device, mounted at the back side, may reduce noise level.
•	Please stop the machine once the pressure reaches 800 mm Ag. Please open the top lid and clean the filter by water or spray gun (please dry the filter first if it is cleaned by water). In case the filter is nearly clogged, please change a new one.
•	When cleaning the dust collection tank, press the pulling rod, turn, pull up and turn it to the concave position. Then you can pull out the lower tank for turning it down.
•	Do not place any object at the air outlet port, because it may drop into the sound buffering pipe, resulting in a damage on the blower.

Product