Yu Cha Company
 
 
English
 
 
 
Submenu
Friendly Links
Line

QR CORD

Counter
Today:847
Total:2204829

Product

CS-102 PULSED DUST COLLECTOR (For Dry and Wet Applications)
NO: CS-1021. CS-1022. CS-1023
Description: Suitable for any powder, such as graphite, fiber and aluminum powder etc. Also, suitable for iron chips and copper chips etc.

CS-1021  TURBO TYPE PULSED DUST COLLECTOR

CS-1022  MULTI-STAGE PULSED DUST COLLCTOR

CS-1023  HIGH-PRESSURE PULSED DUST                 COLLECTOR

** YU CHA nano-membrane filter has                passed the ASHRAE test. The filtration          efficiency reaches MERV 16

 

The main body is made from stainless steel 304,  featuring long durability and easy to clean.
Employ cyclonic centrifugal principle to suck powder  or granule into bottom drum.
The blower is applied for sucking air only. The sucked  dusts do not directly contact with motor for increased  service life of motor.

For dry and wet applications, CS-1022, 1023 can be  used as normal household vacuum cleanner. Can also be used as

a central dust collection device​.

Allows for 24 hours operation.
Suitable for poisonous or non-poisonous dusts such as Aluminum alloy,Magnesium alloy,graphite, fiber, food, carbon powder, aluminum  powder, pesticide and medicine.
Iron chips or copper chips can also be collected with maximum durability and easy cleaning.
High pressure pulsated jet for automatically cleaning  dusts existed in the center of filter core. Dusts are  knocked off automatically, making it suitable for 24  hours operations.
The innovative dust collector in Taiwan with  automatically pulsated filter-core features silent  operation, without need to change filtering bag.
The filter-core is manufactured from PET bellow type filtering element, providing greater filtering area. Applicable for any fine powder.Can be used as a central dust collector.
Easy to clean by simply pulling out the pulling rod and remove the lower tank.
Various motor horsepowers and specification to meet specific requirement.
The filter-core allows for filtering powder of up to 0.1µm(micron) .
Equipped with sound buffering device for reducing noise.
Equipped with pressure gauge for clearly checking if any jamming occurs or not.

 •   The machine is copyrighted by YU- CHA Company.
     YU-CHA Company reserves the right to change the       design
.

                                      

                                      

 

 

 

 

P-9

 Pipe ( There are various materials and diameters )
 

 

  P-6
Flat mouth and round brush
 
 

P-5
Wide mouth

( Plastic or stainless steel )

 
  P-3
P-3 Double fork tube ( sus 304 or ss 400 Paint )
 
 

P-1

Stainless steel Dust hood

 
 

P-4

Adapter ( sus 304 or ss 400 Paint )


 

CS-1021 TURBO TYPE PULSED DUST COLLECTOR

 

Any powder or iron chips are sucked through the air inlet port, which will touch the cyclonic hood. With the centrifugal force, the powder or iron chips will be rotated to the lower tank. The upper tank is equipped with filter-core that may prevent fine powder from splashing. A pulsated jet device is provided on the top cover. Simply connect it to a compressed air source, automatic filter-core cleaning can be performed. A sound buffering device, mounted at the back side, may reduce noise level.

When pressure reaches 320mm Aq, stop the machine, open the top cover for cleaning the filter-core. Apply an air gun for cleaning or use water cleaning (Dry it after water cleaning). If the filter-core is seriously dirtied, this may affect filtering effect. At this time, you need to replace with a new one.

The retaining pressure tank is normally set at a 4 or 5 kg of pressure.

When cleaning the dust collection tank, pressure the pulling rod, turn, pull up and turn it to the concave position. Then you can pull out the lower tank for turning it down.

Do not place any object at the air outlet port, because it may drop into the sound buffering pipe, resulting in a damage on the blower.

 

 

 

 

CS-1022  MULTI-STAGE PULSED DUST COLLECTOR

 

Any powder or iron chips are sucked through the air inlet port, which will touch the cyclonic hood. With the centrifugal force, the powder or iron chips will be rotated to the lower tank. The upper tank is equipped with filter-core that may prevent fine powder from splashing. A pulsated jet device is provided on the top cover. Simply connect it to a compressed air source, automatic filter-core cleaning can be performed. A sound buffering device, mounted at the back side, may reduce noise level.

When pressure reaches 320mm Aq, stop the machine, open the top cover for cleaning the filter-core. Apply an air gun for cleaning or use water cleaning (Dry it after water cleaning). If the filter-core is seriously dirtied, this may affect filtering effect. At this time, you need to replace with a new one.

The retaining pressure tank is normally set at a 4 or 5 kg of pressure.

When cleaning the dust collection tank, pressure the pulling rod, turn, pull up and turn it to the concave position. Then you can pull out the lower tank for turning it down.

Do not place any object at the air outlet port, because it may drop into the sound buffering pipe, resulting in a damage on the blower.

 

CS-1023   HIGH-PRESSURE PULSED DUST COLLECTOR

 

Any powder or iron chips are sucked through the air inlet port, which will touch the cyclonic hood. With the centrifugal force, the powder or iron chips will be rotated to the lower tank. The upper tank is equipped with filter-core that may prevent fine powder from splashing. A pulsated jet device is provided on the top cover. Simply connect it to a compressed air source, automatic filter-core cleaning can be performed. A sound buffering device, mounted at the back side, may reduce noise level.

When pressure reaches 320mm Aq, stop the machine, open the top cover for cleaning the filter-core. Apply an air gun for cleaning or use water cleaning (Dry it after water cleaning). If the filter-core is seriously dirtied, this may affect filtering effect. At this time, you need to replace with a new one.

The retaining pressure tank is normally set at a 4 or 5 kg of pressure.

When cleaning the dust collection tank, pressure the pulling rod, turn, pull up and turn it to the concave position. Then you can pull out the lower tank for turning it down.

Do not place any object at the air outlet port, because it may drop into the sound buffering pipe, resulting in a damage on the blower.