Yu Cha Company
 
 
English
 
 
 
Submenu
Friendly Links
Line

QR CORD

Counter
Today:615
Total:1511317

Product

CS-350 AUTOMATIC POWDER VACUUM SUCTION MACHINE
NO: CS-350-1 . CS-350-2
Description: Apply vacuum suction method to deliver various powders and granules to vibrating sieving machines, mixers and jumbo bags etc....

CS-350 AUTOMATIC POWDER VACUUM SUCTION MACHINE

 

Any powder or granules, 

Automatic suction Unloading. Custom design for delivery capacity and storing  capacity are available.

Maximum safety. The machine does not generate high  temperature suitable for delivering various materials.  Ideal for 24 hours running.
Employs high pressure air jet for instantly knocking off  dust without clogging.
The machine employs PE plastic filter element making  it suitable for viscous or non-viscous material.
Easy to clean and change material.
The machine is manufactured from SUS #304 material,  featuring extreme smoothness on inside and outside  surface. No dust adhering and easy cleaning.
The top cover is equipped with quick retainer and  fitted with silicon for tightness.
The feed valve is made of stainless steel. Durable and easy to cleanThe unloading valve is equipped with a material fullness sensor.Can weigh first,and then send raw materials to the designated place. (Can be designed separately)

Using vacuum force can transport various powders such as graphite, carbon fiber, ash, food, chemical, activated carbon or other particles, microprocessor controlled. It can be fed to space bags, vibrating screens, mixers or packaging machines, etc.

Material suction nozzle and flexible hose.

Suction inlet pipe and PVC soft pipe.

(Can be designed separately.)

The machine specifications are subject to change.
Material suction time and dwell time can be set as desired for added convenience of operation.
Various motor horsepowers and specifications to meet specific requirements.
The filter core is capable of filtrating powder of up to 01.µm(micron).

          

 

 

 

P-9

 Pipe ( There are various materials and diameters )
 

 

  P-6
Flat mouth and round brush
 
 

P-5
Wide mouth

( Plastic or stainless steel )

 
  P-3
P-3 Double fork tube ( sus 304 or ss 400 Paint )
 
 

P-1

Stainless steel Dust hood

 
 

P-4

Adapter ( sus 304 or ss 400 Paint )

 

   The specific gravity of various powders and particles is different. The design structure will also be different.

 *The machine is copyrighted by YU- CHA Company.

*YU-CHA Company reserves the right to change the design

CS-350 AUTOMATIC POWDER VACUUM SUCTION MACHINE

 

CS-350  AUTOMATIC POWDER VACUUM SUCTION MACHINE   

 

The powder or plastic grits to be filtered are sucked through the inlet port, then they fall into material storage tank. The materials fall into the destination (Vibrating sieving machine or jumbo bag) through the unloading valve. The filter core, mounted in the filtering tank, can filtrate fine powder. The control box may control the pulsating time (Automatic reversely pulsating time). Depending on the operator’s requirement, the unloading valve can be selected at machine stop then unloading or continuous unloading without stop.

Do not place any object at the air outlet port, because it may drop into the sound buffering pipe, resulting in a damage on the blower.

When pressure reaches 800mm Aq, stop the machine, open the top cover for cleaning the filter-core. Apply an air gun for cleaning or use water cleaning (Dry it after water cleaning). If the filter-core is seriously dirtied, this may affect filtering effect. At this time, you need to replace with a new one.

When changing material, if the material cannot be mixed, you need to remove the filter core for replacing with a new one. To clean the material storage tank, simply pull out the connector located at the center of the filtering tank and the material storage tank.